Flexible & Multi Functional Air Differential Pressure Transmitter
PAT-series
Features:
DIP-switches on the PCB to select Pressure Range, Pressure Unit and Response Time
High accuracy +/-1%
Power Supply and Output
16-30 Vac/dc with 0-10 Vdc (3-wire) for PAT 010D
12-30 Vdc with 4-20 mA (2-wire) for PAT 420D (Stocked Model)
50 x 22.5 mm LCD digital display
Duct mounting set included
Pressure ranges
10 pressure ranges in same unit selectable via DIP-switches on pcb.
Full range:
0 to 100 Pa, 0 to 250 Pa, 0 to 500 Pa, 0 to 750 Pa or 0 to 1000 Pa
Bi-directional:
-50 to +50 Pa , -125 to 125 Pa, -250 to +250 Pa, -375 to +375 Pa or -500 to +500 Pa
Pressure Units
Other pressure units than Pa are available and selectable via DIP switches on pcb mmHH2O, mbar, inWG, mmHG, daPa, Kpa, hPa
Response Times
Response time selectable via DIP switches on pcb - 0.5 ,1.0, 2.0 or 4.0 seconds
Mounting
To mount the PAT air differential pressure transmitter, mount the ABS plate on the wall.
Insert the PAT air differential pressure transmitter on the fixing plate.
Rotate the housing in clockwise direction until you hear a 'click' which confirms that the PAT air differential pressure transmitter is correctly installed.
Electrical Measurement
Electrical measurement ( + - OUT ) on pcb terminals can be done by removing the grey rubber plug on the back side of the PAT device.
